Bachelors in Engineering (Applied Mechanics)

VSB - Technical University of Ostrava
3 years
Full time
Bachelor's degree
Scholarships available
On campus
Ostrava
English
Inquire for more information

About this program

Bachelors in Engineering (Applied Mechanics)

The graduate student gains the very good knowledge and ability in the field of solving the technical problems attached with mechanics. Except of standard design abilities and skills he gains the deeper insight and understanding to the physical background of the technical objects. The graduate will be able to perform the computer simulations as standard as single-purpose, using both commonly accessible and specialized software. The graduate also gains the ability to perform the measurement and evaluation in the fields of tensometry, photoelasticimetry and vibration diagnostic. The graduate will find employment in any mechanical engineering firm as analysist, computer simulation worker or designer.

Find out more about Bachelors in Engineering (Applied Mechanics) by filling in your details and the school will contact you.

Admission requirements

Criteria for Admission

  • Secondary school-leaving certificate
  • English-language ability – students, who are not native speakers may be asked to demonstrate their ability to study in English, e.g. by presenting the results of any language tests they have taken. English language ability document - minimum requirements: IELTS score 5,0; TOEFL internet-based score 62 (possibly other certificates at the same level).
  • Entrance examination (according to the Faculty Admission Procedure Rules and Conditions for Admission)

Does this course require proof of English proficiency?

The TOEFL iBT® test is accepted by 11,500 universities and higher education institutions in over 160 countries. Book your test today!

Learn more Advertisement

Program content

Semester 1

Compulsory

  • Fundamentals of Energy Processes
  • Mathematics 1
  • Mechanical Engineering Fundamentals
  • Physics I
  • Structural Materials
  • Technical Calculations
  • Welding Fundamentals
  • Work Transport and Logistics

Semester 2

Compulsory

  • Constructive Geometry
  • Machine Operating, Diagnostics and Maintenance
  • Mathematics II
  • Properties and testing of materials
  • Statics
  • Technology of Machining

Semester 3

Compulsory

  • Dynamics I
  • Engineering Metrolgy
  • Fluid Mechanics
  • Graphic Systems
  • Mathematics III
  • Mechanics of Materials

Semester 4

Compulsory

  • Computer aided design I
  • Control System Fundamentals
  • Electrical Engineering
  • Forming and Casting Technologies
  • Machines Parts and Mechanisms
  • Physics II
  • Thermomechanics

Semester 5

Compulsory

  • Dynamics II
  • Experimental Methods in Mechanics
  • Finite Element Methods 1
  • Machine Parts and Mechanisms II
  • Mechanics of Materials for Applied Mechanics
  • Technical Vibrations

Semester 6

Compulsory

  • Fatigue of material
  • FEM Computations
  • Numerical Mathematics
  • Selected Chapters from Applied Mechanics
  • Vibration Diagnostics

Scholarships & funding

Several scholarship options are available. Please check the university website for more information.

Tuition

Tuition fee: 50 000 CZK per semester, approx. 2000 EUR per academic year

Qualification

Graduate's knowledge

The graduate has the basic and advanced knowledge in mechanics. The extension means especially force transfer analysis, the stress distribution and dynamic behavior via both calculation and experiment. In dynamics this is the knowledge of describing and solving the complicated space motion, kinematic and dynamic solution of mechanisms and the essential analytical mechanics. Special emphasize on the vibration with more degrees of freedom. In flexibility and strength of materials this is the knowledge of the 2D and 3D combined loading, analysis and evaluation of the complex stress state. Farther the knowledge in Thermo-mechanics. The graduate has the detailed knowledge of the finite element method as on the theoretical level as practical application. The graduate has the basic knowledge in electrotechnics and numerical mathematics, experimental methods in mechanics, tensionmetry and vibration diagnostics.

Graduate's skills

The graduate has the basic and advanced knowledge in mechanics. The extension means especially force transfer analysis, the stress distribution and dynamic behavior via both calculation and experiment. In dynamics this is the knowledge of describing and solving the complicated space motion, kinematic and dynamic solution of mechanisms and the essential analytical mechanics. Special emphasize on the vibration with more degrees of freedom. In flexibility and strength of materials this is the knowledge of the 2D and 3D combined loading, analysis and evaluation of the complex stress state. Farther the knowledge in Thermo-mechanics. The graduate has the detailed knowledge of the finite element method as on the theoretical level as practical application. The graduate has the basic knowledge in electrotechnics and numerical mathematics, experimental methods in mechanics, tensionmetry and vibration diagnostics.

Graduate's general competence

The graduate is qualified to solve the more complicated problems in mechanical engineering, linked to mechanics. He is also qualified to standard designer practice and also to lead the small working team. He is qualified to communicate in foreign language, especially English.

Career paths

Graduate's employment

The graduate will acquire the deeper knowledge of the mechanics of rigid bodies, stiffness and strength, the mechanics of liquids, termomechanics, the engineering materials, computer science, technical measurement and experimental methods. The emphasis is placed to the preparedness and ability to develop and practically use the computer methods for solving the technical problems. The graduate is able to practice the static, kinematic and dynamic analysis of structures and mechanisms, to evaluate the technical state of machines, to solve the technical problems, related to the fluid flow, to the dynamics of hydromechanic and thermodynamic systems. The graduate is able to use and develop the computer aid of design, projection and scientific activities in practical applications. The deeper knowledge of fundamental disciplines of mechanical engineering forms the wide basis for creative realizing in mechanical engineering and for subsequent professional grow up via consequential master and doctoral studies. The graduate can assert himself as a designer, computer modeling specialist, research worker, or in the technical diagnostic of machinery works, or after master and doctoral studies as the scientific worker.

Message the school

Want to know more about this program, Bachelors in Engineering (Applied Mechanics)? Fill out the following form and include any questions you have. This information will be sent directly to the school, and a representative will respond to your enquiry.
Dial Code *
Currently living in *
Nationality *

reCAPTCHA logo This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

About this institute

VSB - Technical University of Ostrava

VSB-TUO’s study programs are built on a 170-year tradition. Currently, there are almost eleven thousand undergraduates and graduates studying for degrees at Bachelor’s, Master’s and PhD levels in engineering, IT, technology, economics and business administration. Courses are provided by seven...


Read more about this school

Why study at VSB - Technical University of Ostrava

Study at VSB-TUO places an emphasis on practical training, whilst investigating real problems from today’s state-of-the-art industries, using the latest software and instruments. In many subjects 50% of the coursework is practically oriented, perfectly complimenting the advanced theoretical instruction, and ensuring that graduates have gained the education and experience sought by employers the world over. VSB-TUO has strong links to industry and thrives on applied research, in cooperation with companies and institutions worldwide, in finding innovative solutions to modern day issues.

Contact info

VSB - Technical University of Ostrava

17. listopadu 2172/15
70800 Ostrava-Poruba
Czech Republic

 Show phone number
www.vsb.cz

Request Information

Want to know more about Bachelors in Engineering (Applied Mechanics)? Fill out the following form and we'll pass your details on to a representative from the school, who will respond to your enquiry.

Reviews

Be the first to write a review!